The YS-982M01 is a simple manual analog glue dispenser that applies the liquid material from the syringe barrel with electrically controlled pneumatic pressure. It is very easy to adjust the volume of the material by changing the timer settings, the pneumatic pressure or the gauge of the dispensing tip.
The manual glue dispenser can work for wide range of liquids, including materials like epoxy resin, silicone, lubricants, screw-tightening glue, anti-soldering solvent or tin paste.

Power switch: Turns unit on and off. Illuminated to indicate “ON” position.
Air pressure: Controls and indicates air pressure, regulator/gauge: the dispensing circuit.
Mode switch: Places the dispensing circuit in automatic or manual shot mode.
Timer control: Adjust the shot of auto dispense mode.
Vacuum control: Adjust the intensity of the “suck back” vacuum applied to the dispensing circuit.
Dispensing outlet: Provide a quick connect receptacle for the dispensing air circuit.
Foot switch: Activates the dispensing circuit.
Air-in tube: High-pressure air input, 6 mm tubing
Dispensing control: Four grades for the dispensing cycle time.

YS-982M-1 Handheld Manual Glue Dispenser With Foot Pedal

Capacitor Lead Cutting

Radial Lead Cutting Machine

LED Lead Cutting

Radial/Axial Lead Forming Machine

Transistor Cutting

Wire Cut and Strip Machine

Taped Components Cutting

Wire Crimping Machine

Other Components Cutting

Capacitor Lead Forming

Tube/Strip Cutting Machine

LED Lead Forming

Winding and Bundling

Transistor Forming

Wire Processing Auxiliary equipment

Resistor/Diode Forming

Screwdriver With Feeder

IC And Jumper Wire Forming

Robot Glue Dispenser

PCB Separator& PCB lead Cutting Machine

Pneumatic Forming Machine

Wire Cut And Strip

Wire Twister/ Wire Splicing

SMD Components Counter

Wire Stripping Machine

Coaxial Cable Stripping

Auto Soldering Machine

Auto Wire Tin Dip Machine

Other Machines

Wire Strip& Crimp

Auto Housing Insertion Machine

Two-end Crimp

One-end Crimp

Wire Terminal Crimp

Combined Wire Crimping

Soft Tube Cutting

Velcro/Film/Strip Cutting

Hot Knife Cutting

Wind And Bind

Cable Tie Tying

Dual-Platform Screwdriver Robot

One-Platform Screwdriver Robot

Handheld Screw Driving

Z Axis Screw Machine

PCB Depanel

PCB Lead Cutting

Packing Machine

Customized Assembly Machine

Vibration Feeder Bowl

Automobile Cable Procesing

New Energy Cable Procesing

Wire Prefeeder

Wire Taping

Push-Pull Force Tester

Wire Labeling&Marking

Crimp Applicators

RJ45/RJ11 Crimp Machine

Wire Cut Strip And Bend

Wire Twister

Wire Splicing

Pin header cutter

Basic Glue Dispenser

Two-Part Epoxy Dispenser

Customized Screwdriver Machine

LED/Capacitor Taping Machine

Heat Shrink Heating

Hot Melt Glue Dispenser

YS-982M-1 Handheld Manual Glue Dispenser With Foot Pedal

glue dispensing robot

automatic glue dispenser

glue manual binding machine